TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
40
Figure 4-31
VLAN Index: Select the VLAN index f u can specify 8 groups in maximum.
s of VLAN, and if you leave the Tagged blank, the
d if you leave the Tagged blank,
e the Tagged blank, the tag
out the VLAN Groups.
ach Interface
in Figure 4-30, you can assign the PVID for each
or this VC. Yo
VLAN ID: This indicates the VLAN group.
ATM VCs: Select the ATM VCs as member
tag in frames will be deleted when transmitted from the VC.
Ethernet: Select the Ethernet port as a member of VLAN, an
the tag in frames will be deleted when transmitted from the port.
USB: Select the USB port as a member of VLAN, and if you leav
in frames will be deleted when transmitted from the port.
VLAN Group Summary: This displays the information ab
2. Assign VLAN PVID for e
Click Assign VLAN PVID for each Interface
interface in the next screen (shown in
Figure 4-32).
To Next Page
Loading...
