17
D. Configuration for Bridge Mode
Wireless Settings Configuration
This page will then display.
fter completing the above configuration, please proceed to Wireless
Settings Configuration
Click NEXT
Note
This page will then display.
Select an Encryption type
Click NEXT
The wireless security is Disabled by default. You are suggested to select
an Authentication Type for security settings. WPA2-PSK is recommended.
fter completing the above configuration, please proceed to Quick Start
Complete.
Select an Authentication Type
Enter the Bridge information
provided by your ISP
Create a unique and easy to remember
name for your wireless network. You
can also keep default settings without
the device being affected
Keep the default setting: Activated.
If you want to disable Access Point,
please select Deactivated
Enter a Security Key using
8-64 characters
To Next Page
Loading...
