51
Step 9:
Look for Status, select Active.
Step 10:
Click on Add.
Step 11:
As we enabled Encryption, we need to go to VPN->IPsec, enable IPsec and then click on Save.
C. Configuring L2TP client on remote PC (Windows 7)
NOTE: For remote PC to connect to L2TP server, it can use Windows built-in L2TP software
or Third-party L2TP software.
Step 1:
Click on Start->Control Panel->Network and Internet->Network and Sharing Center.
Step 2:
Click on Set up a new connection or network.
To Next Page
