TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router
Standard AP Mode
The Standard AP Mode includes the following four connection types: Access Point, Repeater,
Bridge with AP and Client.
¾ Access Point
In this mode, the TL-MR3040 is connected to a wired network and transforms the wired Internet
access into wireless so that multiple users can share the Internet.
¾ Repeater
TL-MR3040 is used to extend the range of wireless signal of the existing AP or wireless router.
In this mode, the only wired port works as LAN. Computer could connect to the device by either
wired or wireless way. The SSID of TL-MR3040should be the same as that of the device you
-7-
To Next Page
Loading...
