TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router
Figure 3-16 Quick Setup – Wireless Operation Mode
¾ If you choose Access Point (AP), the next screen will appear as shown in Figure 3-17.
This operation mode allows wireless stations to access.
Figure 3-17 Quick Setup – AP
z Wireless Network Name (SSID) - Enter a value of up to 32 characters. The same
Name (SSID) must be assigned to all wireless devices in your network. The
default SSID is set to be TP-LINK_POCKET_3040_xxxxxx (xxxxxx indicates the
last unique six characters of each Router's MAC address), which can ensure your
wireless network security. But it is recommended strongly that you change your
networks name (SSID) to a different value. This value is case-sensitive. For
example, MYSSID is NOT the same as MySsid.
z Region - Select your region from the pull-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to use the
wireless function of the Router in a region other than one of those specified in this
-17-
To Next Page
Loading...
