TP-Link TL-PA7027P - Add Another Powerline Adapter

10
Chapter 2
Use Your Powerline Adapter
2. 4. Add Another Powerline Adapter
I want to:
Add a new powerline adapter into the existing powerline network to extend my network.
For example, I’ve already set up a powerline network using powerline devices, but the
network does not reach everywhere I need it to. I purchased another one to further
extend my network.
How can I do that?
1. Plug the new powerline adapter into a wall outlet near one of the existing powerline
devices.
Same Electric
al Circuit
Same Electric
al Circuit
2. Wait for a minute, and check whether the Powerline LED turns on. If it’s on, skip
to step 3. If it’s not, continue with step 2 to pair the new powerline adapter into the
secured powerline network.
a . Press the Pair button on one of the existing powerline devices for 1 second. Its
Power LED
starts blinking.
b . Within 2 minutes, press the Pair button on the new powerline adapter for 1
second. Its Power LED
starts blinking. When the Powerline LED turns on,
the pairing process is complete.
Existing
Powerline Device
New
Powerline Device
within 2 minutes
Blinking
Blinking
On
3. When the Powerline LED turns on, it’s done. Relocate the new powerline adapter
to the place where wired internet access is needed.