Related Document
This Installation Guide is also available in PDF on our website. To obtain the latest 
documentation and product information, please visit the official website:
http://www.tp-link.com
This Installation Guide describes the hardware characteristics, installation methods 
and the points that should be attended to during the installation. This Installation 
Guide is structured as follows:
Chapter 1 Introduction. This chapter describes  the external components  of 
the switch.
Chapter 2 Installation. This chapter illustrates how to install the switch.
Chapter 3 Lightning Protection. This chapter illustrates how to prevent light-
ning damage.
Chapter 4 Connection. This chapter illustrates how to do the physical connec-
tion of the switch.
Appendix A Troubleshooting.
Appendix B Specifications.
Appendix C Technical Support.
This Installation Guide is for:
Network Engineer                           Network Administrator
Due  to the  similarity  in  structure  of  the  Gigabit Unmanaged  Switch series,  in 
this  Installation  Guide  we  take TL-SG1024 as an example to  illustrate Chapter  2 
Installation, Chapter 3 Lightning Protection and Chapter 4 Connection.
This Guide uses the specific formats to  highlight special messages. The following 
table lists the notice icons that are used throughout this guide.
Remind to be careful. A caution indicates a potential which may result in 
device damage.
Remind to take notice. The note contains the helpful information for a 
better use of the product.