TP-Link TL-SG3109 - Switch - Define SNMP Security

70
71
Dening SNMP Group Members
Dening SNMP Communities
11.3.1 Dening SNMP Global Parameters
The SNMP Security Global Parameters Page permits the enabling of both SNMP and Authentication notications.
To dene SNMP security global parameters:
1. Click System > SNMP Management > Security > Global Parameters. The SNMP Security Global Parameters Page
opens:
Figure 100: SNMP Security Global Parameters Page
The SNMP Security Global Parameters Page contains the
following elds:
Local Engine ID (0-32 Characters) — Displays the
local device Engine ID. The eld value is a hexadecimal
string. Each byte in hexadecimal character strings
is two hexadecimal digits. Each byte can be separated by a period or a colon. The Engine ID must be dened before
SNMPv3 is enabled. Select a default Engine ID that is comprised of an Enterprise number and the default MAC address.
Use Default — Uses the device-generated Engine ID. The default Engine ID is based on the device MAC address and
is dened per standard as:
– First 4 octets — rst bit = 1, the rest is IANA Enterprise number.
– Fifth octet — Set to 3 to indicate the MAC address that follows.
– Last 6 octets — MAC address of the device.
2. Dene the Local Engine ID and Use Default elds.
3. Click . The SNMP global security parameters are set, and the device is updated.
11.3.2 Dening SNMP Views
SNMP Insert space views provide or block access to device features or portions of features. For example, a view can be
dened which provides that SNMP group A has Read Only (R/O) access to Multicast groups, while SNMP group B has
Read-Write (R/W) access to Multicast groups. Feature access is granted via the MIB name or MIB Object ID.
To dene SNMP views:
1. Click System > SNMP Management > Security > Views. The SNMP Security Views Page opens:
Figure 101: SNMP Security Views Page
The SNMP Security Views Page contains the following
elds:
View Name — Displays the user-defined views. The
view name can contain a maximum of 30 alphanumeric
characters.
Object ID Subtree — Displays the device feature OID
included in or excluded from the selected SNMP view.
View Type — Indicates whether the defined OID
branch will be included in or excluded from the selected






