EasyManua.ls Logo

TP-Link TL-SG3109 - Define Line Passwords; Define Enable Passwords

TP-Link TL-SG3109
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
31
5.1.2.2 Dening Line Passwords
Network administrators can define line passwords in the Line Password Page. After the line password is defined, a
management method is assigned to the password. The device can be accessed using the following methods:
Console Passwords
Telnet Passwords
Secure Telnet Passwords
To congure line passwords:
1. Click System > Management Security > Passwords > Line Password. The Line Password Page opens:
Figure 41: Line Password Page
The Line Password Page contains the following elds:
Console Line Password Denes the line password
for accessing the device via a Console session. Pass-
words can contain a maximum of 159 characters.
Telnet Line Password Denes the line password
for accessing the device via a Telnet session. Pass-
words can contain a maximum of 159 characters.
Secure Telnet Line Password Defines the line password for accessing the device via a secure Telnet session.
Passwords can contain a maximum of 159 characters.
Conrm Password Conrms the new line password. The password appears in the ***** format.
2. Dene the Console Line Password, Telnet Line Password, and Secure Telnet Line Passwordelds.
3. Redene the Conrm Password eld for each of the passwords dened in the previous steps to verify the passwords.
4. Click . Line password is congured and device is updated.
5.1.2.3 Dening Enable Passwords
The Enable Password Page sets a local password for a particular access level.
To enable passwords:
1. Click System > Management Security > Passwords > Enable Password. The Enable Password Page opens:
Figure 42: Enable Password Page
The Enable Password Page contains the following elds:
Enable Access Level Defines the access level
associated with the enable password. Possible field
val-ues are 1-15.
Password Denes the enable password.
Confirm Password Confirms the new enable
password. The password appears in the ***** format.
2. Congure theelds and click .The password is enabled and the device is updated.
5.2 Conguring Network Security
Network security manages both access control lists and locked ports. This section contains the following topics:

Table of Contents

Other manuals for TP-Link TL-SG3109

Related product manuals