The rear p
anel of TL-SL2428 is shown as the following figure.
Figure 2-7 Rear Panel of TL-SL2428
The rear panel of TL-SL2452 is shown as the following figure.
Figure 2-8 Rear Panel of TL-SL2452
Grounding Terminal: TL-SL2210/TL-SL2218/TL-SL2428/TL-SL2452 already comes with
Lightning Protection Mechanism. You can also ground the switch through the PE (Protecting
Earth) cable of AC cord or with Ground Cable.
AC Power Socket: Connect the female connector of the power cord here, and the male
connector to the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage (100-240V~ 50/60Hz 0.3A for TL-SL2210/TL-SL2218,
100-240V~ 50/60Hz 0.6A for TL-SL2428 and 100-240V~ 50/60Hz 1.0A for TL-SL2452 ).
Return to CONTENTS
8
To Next Page
Loading...
