TP-Link TL-SL2210 - 7.1 STP Config; 7.1.1 STP Config

Port: Displays the port numbe
r.
Untagged: The port will be an untagged member of the specific VLAN if you
select it.
Tagged: The port will be an tagged member of the specific VLAN if you
select it.
NotMember: The port will not be a member of the specific VLAN if you select
it.
PVID: Here you can change the PVID of the specific port.
LAG: Displays the LAG to which the port belongs to.
6.2 Application Example for 802.1Q VLAN
 Network Requirements
 Switch A is connecting to PC A and Server B;
 Switch B is connecting to PC B and Server A;
 PC A and Server A is in the same VLAN;
 PC B and Server B is in the same VLAN;
 PCs in the two VLANs cannot communicate with each other.
 Network Diagram
 Configuration Procedure
 Configure Switch A
59