Cluster Role: Displays the role the switch plays in the cluster
.
14.3.2 Cluster Config
On this page you can configure the status of the cluster the switch belongs to.
Choose the menu Cluster→Cluster→Cluster Config to load the following page.
For a candidate switch, the following page is displayed.
Figure 14-12 Cluster Configuration for Candidate Switch
The following entries are displayed on this screen:
Current Role
Role: Displays the role the current switch plays in the cluster.
Role Change
Individual: Select this option to change the role of the switch to be individual
switch.
For a member switch, the following page is displayed.
Figure 14-13 Cluster Configuration for Member Switch
The following entries are displayed on this screen:
Current Role
Role: Displays the role the current switch plays in the cluster.
206
To Next Page
Loading...
