Need help?Do you have a question about the TP-Link TL-SX3008F and is the answer not in the manual?
General| Switching Capacity | 160 Gbps |
|---|---|
| Forwarding Rate | 119.04 Mpps |
| MAC Address Table | 16K |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Ports | 8x 10G SFP+ |
| Jumbo Frame | 9 KB |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40 to 70 °C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
Provides essential rules to avoid device damage and bodily injury during installation and operation.
Details desktop and rack installation procedures for the switch, including important considerations.
Provides a checklist to verify correct installation, including ventilation, power, grounding, and network connectivity.
Details the steps for powering on the switch, including connecting the power cord and verifying voltage.
Details how to configure and manage the switch using GUI or CLI in Standalone Mode.
Guides on how to recover forgotten username and password using the console port and bootUtil menu.
To Next Page