17
English
Operation Mode Setting
Antenna Alignment
After basic configuration of
operation mode, you can adjust
your CPE’s direction to get a
better signal strength according to
the parameters shown on the
Antenna Alignment page.
This page will then display.
Click Quick Setup
Note
The AP supports three operation modes: AP Client Router, AP
Router and AP.
Choose the Operation
Mode Type appropriate
to your needs
Click Next
Click Antenna Alignment
Click Wireless
The web management page will
display after your successful
login.
Note
If you want to configure the three operation modes, you can refe
to the User Guide in the CD.
Note
Once selected, the region option can’t be adjusted unless you
reset the device to factory defaults and reconfigure it again.
To Next Page
Loading...
