TP-Link TL-WA701ND Installation Manual

1
Assign a static IP address 192.168.1.100 for your computer. Please refer to
the T3 in Troubleshooting guide if you need assistance.
Connect to the Access Point with
the Ethernet cable or via
wireless.The default SSID of the
Access Point is TP-LINK_
XXXXXX. The XXXXXX is the
last 6 characters of the Access
Point’s MAC address.
Plug the provided power adapter
into the power jack on the back of
the Access Point, and the other
end to a standard electrical wall
socket.
Note
If the distance between the outlet and the Access Point is too long to supply
the power, you can refer to the Power over Ethernet(PoE) solution in
Appendix B: With PoE Setup.
Note
The product model shown in this QIG is TL-WA701ND, as an example.
Svetofor

TP-Link TL-WA701ND Specifications

General

5 GHz	No
2.4 GHz	Yes
Modulation	16-QAM, 64-QAM, CCK, DBPSK, DQPSK, OFDM
Frequency band	2.4 - 2.4835 GHz
Maximum indoor range	30 m
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Receiver sensitivity	135M: -69dBm@10% PER 54M: -73dBm@10% PER 11M: -85dBm@8% PER 6M: -89dBm@10% PER 1M: -90dBm@8% PER
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	150 Mbit/s
Placement	Table
Certification	RoHS, FCC
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Security algorithms	128-bit WEP, 152-bit WEP, 64-bit WEP, SSID, TKIP, WPA, WPA-PSK, WPA2, WPA2-PSK, WPS
Output current	0.6 A
Output voltage	9 V
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna gain level (max)	5 dBi
Compatible operating systems	Windows 98SE, NT, 2000, XP, Vista, 7 MAC OS NetWare UNIX, Linux
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	125 mm
Width	181 mm
Height	36 mm