3
English
LED Status Indication
Off Power off.
On Power on.
Off The device has a system error.
On The device is initialising.
Flashing The device is working properly.
Off There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but no
activity.
Flashing There is an active device linked to the corresponding port.
Off The Wireless function is disabled.
Flashing The Wireless function is enabled.
Slow
Flash
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function.
Quick
Flash
A wireless device failed to be added to the network by WPS
function.
LED explanation:
Note
If the LEDs display abnormally, please check to see if all the cable
connectors (power adapter and Ethernet cable) are well connected to you
device.
Note Please make sure that your wired device’s IP address is set as Obtain an IP
address automatically before configuring the device.
Open your web browser, type in http://tplinkap.net in the address bar and
press Enter.
A dialog box will prompt you for the User name and Password. Enter the
default values (both are admin) and click OK.
Configuring the Device
To Next Page
Loading...
