TL-WPA4220/TL-WPA281 300Mbps AV500/AV200 WiFi Powerline Extender
8
2.5 Wi-Fi Clone Button for Super Range Extension
Wi-Fi Clone button is used for copying the wireless settings (including SSID and wireless password)
from the front wireless router.
Wi-Fi Clone Steps:
Before taking the steps below, please make sure the current wireless password of the front router isn’t
the default value.
1. Press the WPS button on the router for 2 seconds. (Here we take TP-LINK router as an example.)
2. Press the Wi-Fi Clone button on the extender for 2 seconds. The extender will reboot later.
* It’s recommended that you plug the extender near the router to use Wi-Fi Clone button.
After Wi-Fi Clone:
A unified wireless network is established. The SSID and wireless password of the powerline extender
will be the same as the wireless router.
To Next Page
Loading...
