TL-WPA4220/TL-WPA281 300Mbps AV500/AV200 WiFi Powerline Extender
10
Chapter 3 Configure the Device
This Chapter describes how to configure your Access Point via the web-based management page. The
300Mbps AV500/AV200 WiFi Powerline Extender is easy to configure and manage with the Web-based
(Internet Explorer, Netscape
®
Navigator, Firefox, Safari, Opera or Chrome) management page, which
can be launched on any windows, Macintosh or UNIX OS with a web browser.
3.1 Login
3.1.1 For Wired Connection
If your computer is connected to the extender via Ethernet cable, you can log in the extender by
following the steps below:
1. Insert the TP-LINK Resource CD into the CD-ROM drive. The following screen will appear. Select
model TL-WPA4220 and then choose Management Utility from the drop-down menu.
Figure 3-1 Setup Wizard
To Next Page
Loading...
