TL-WPA4220/TL-WPA281 300Mbps AV500/AV200 WiFi Powerline Extender
24
Figure 3-20
Station Settings
¾ MAC Address - The remote station's MAC address. The value can not be changed.
¾ Device Password - The security ID of remote station.
¾ Device Name - The name used for identifying a station.
To add or modify a station entry, click the Add or Modify button in operation column and following these
instructions:
1. Enter the station password in Device Password field. The format of the password is
XXXX-XXXX-XXXX-XXXX (X is any character). For example, RLXL-BYPI-MZBO-OPAB.
2. Enter a name you want to give the station in the Device Name field or leave it empty. For example,
Station A.
3. Click the Save button to save this entry.
Figure 3-21 Add or Modify PLC Station entry
To add or modify another entries, repeat steps 1~3.
Click the Delete button in the operation column to delete a station entry.
Click the Add New... button to add a station into current network. The steps are the same as adding a
station entry.
To Next Page
Loading...
