TL-WR740N/TL-WR741ND 150Mbps Wireless N Router
- 72 -
4.12 Advance Routing
Figure 4-56 Advanced Routing Menu
There are two submenus under the Network menu (shown in Figure 4-56): Static Routing List
and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.
4.12.1 Static Routing
Choose menu “Advanced Routing → Static Routing”, and you can configure the static route in
the next screen, shown in Figure 4-57. A static route is a pre-determined path that network
information must travel to reach a specific host or network.
Figure 4-57 Static Routing
To add static routing entries, follow the steps below.
1. Click Add New… shown in Figure 4-57, you will see the following screen Figure 4-58
Figure 4-58 Add or Modify a Static Route Entry
To Next Page
Loading...
