TL-WR740N/TL-WR741ND 150Mbps Wireless N Router
- 87 -
4.16.6 Reboot
Choose menu “System Tools → Reboot”, you can click the Reboot button to reboot the Router
via the next screen.
Figure 4-78 Reboot the Router
Some settings of the Router will take effect only after rebooting, which include:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Wireless configurations.
• Change the Web Management Port.
• Upgrade the firmware of the Router (system will reboot automatically).
• Restore the Router's settings to factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically.
4.16.7 Password
Choose menu “System Tools → Password”, you can change the factory default user name and
password of the Router in the next screen as shown in Figure 4-79.
Figure 4-79 Password
It is strongly recommended that you should change the factory default user name and password
To Next Page
Loading...
