TP-Link TL-WR743ND - 4.7 Wireless Configuration

TL-WR743ND 150Mbps Wireless AP/Client Router
- 48 -
3.
If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. Then you
should enter the following parameters (Figure 4-9):
Figure 4-9 WAN – PPPoE/Russia PPPoE
 User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
 Confirm Password - Enter again the Password provided by your ISP to ensure the
password you entered is correct.
 Secondary Connection - It’s available only for PPPoE Connection. If your ISP provides
an extra Connection type such as Dynamic/Static IP to connect to a local area network,
then you can check the radio button of Dynamic/Static IP to activate this secondary
connection.
 Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
 Dynamic IP - You can check this radio button to use Dynamic IP as the secondary
connection to connect to the local area network provided by ISP.
 Static IP - You can check this radio button to use Static IP as the secondary
connection to connect to the local area network provided by ISP.