TL-WR743ND 150Mbps Wireless AP/Client Router
- 59 -
Local Wireless Name - Enter a value of up to 32 characters. The same Name (SSID) must
be assigned to all wireless devices in your network.
Enable Wireless Router Radio - The wireless radio of the Router can be enabled or disabled
to allow wireless stations access. If enabled, the wireless stations will be able to access the
Router. Otherwise, wireless stations will not be able to access the Router.
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the wireless
router will broadcast its name (SSID) on the air.
Disable Local Wireless Access - If you select the Disable Local Wireless Access
checkbox, the wireless router will disable local wireless access; other stations will not be able
to access the Router by wireless.
Click Survey button on the Wireless page shown as Figure 4-17, and then AP List page will
appe
ar, as shown in Figure 4-18. Find the SSID of the Access Point you wan
t to access, and click
Connect in the corresponding row. For example, the desired item is selected. The target network’s
SSID will be automatically filled into the corresponding box which is shown as the Figure 4-19.
To Next Page
Loading...
