10
3
After a successful login, click Quick Setup from the menu to
configure your TL-WR802N. Click Next.
Status
Quick Setup
WPS
Working Mode
Network
Wireless
DHCP
Quick Setup
Run the Quick Setup to manually congure your internet connection and wireless settings.
To continue, please click the Next button.
To exit, please click the Exit button.
NextExit
Logout
System Tools
4
Choose the Working Mode you need, then click Next and
refer to the sections below for further instruction.
Working Mode
NextBack
Standard Wireless Router
Access Point
Repeater
Client
WISP Client Router
Start >> Working Mode >> Wireless >> Network Settings >>Finish
Standard Wireless Router Mode
1. Choose your WAN Connection Type:
> If you don't know your connection type, you may select
Auto-Detect. Before continuing, you must be connected to
your existing network or modem via the LAN/WAN port.
> If you select Static IP, then enter the IP Address and Subnet
Mask given to you by your ISP, and click Next.
> If you select Dynamic IP, click Next and continue to step 2.
> If you select PPPoE/Russian PPPoE, then enter the User
To Next Page
Loading...
