2
Physical Description
Before hardware connection, please write down the Wireless
Password and SSID found on the label of your TL-WR802N. Both
are case-sensitive.
Default Access:
http://tplinkwifi.net
Username: admin
Password: admin
SSID:TP
-
LINK
_
3D6C
Password/PIN:12345670
B0487A663D6C
MAC
TL-WR802N LED Guide:
LED Status
Solid The device is working properly.
Blinking System is booting.
The Ethernet Cable is connecting to the product.
Reset
LAN/WAN
Power
LAN/WAN: This LAN/WAN port works as LAN in AP/Repeater/Client/WISP Client
Router mode and as WAN in Wireless Router mode. As LAN, it connects the
Router to the local PC; as WAN, it enables you connect the DSL/cable Modem,
or Ethernet.
Power: This port is used to connect the provided power adapter.
Reset: It resets the TL-WR802N to factory default settings.
Note: For more detailed information about Reset, please refer to Appendix:
Troubleshooting.
Wireless Password/PIN:
Default Password
SSID: Default Wireless
Network Name
To Next Page
Loading...
