TP-Link TL-WR802N - Wireless Connection

English
11
Name and Password given to you by your ISP, and click Next.
> If you select L2TP/Russian L2TP, then enter the User Name
and Password given to you by your ISP, and click Next.
> If you select PPTP/Russian PPTP, then enter the User Name
and Password given to you by your ISP, and click Next.
Quick Setup - WAN Connection Type
Auto-Detect
Static IP
PPPoE/Russian PPPoE
Dynamic IP (Most Common Cases)
The Quick Setup is preparing to set up your connection, please choose one type below according to your ISP.
The detailed description will be displayed after you choose the corresponding type.
NextBack
L2TP/Russian L2TP
PPTP/Russian PPTP
Note: For users in some areas (such as Russia, Ukraine etc.), please contact your ISP to choose connection type manually.
2. Set your wireless parameters. If desired, you may change your
Wireless Network Name, Wireless Security Mode, or Password.
Click Next and then Reboot.
Quick Setup - Wireless
Wireless Network Name: (Also called the SSID)
Ensure you select a correct country to conform local law.
Incorrect settings may cause interference.
Region:
Warning:
United States
Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish
PSK Password:
Wireless Security:
WPA-PSK/WPA2-PSK
(You can enter ASCII characters between 8 and 63 or Hexadecimal characters betwee
12345670
NextBack
Wireless Radio:
Enable
Disable Security
No Change
Note: After the rebooting, reconnect to the network according to Instant
Wireless Connection.