16
• Less Obstacles = Better Performance
Try to choose a location that will minimize the number of
obstacles between the TL-WR802N and your wireless router.
Open corridors or other spacious locations will typically provide
better conditions for performance than a crowded room.
• Less Interference = More Stability
Try to choose a location that minimizes interference from
devices operating on the same wireless frequency, such as
cordless phones bluetooth devices, and microwave ovens.
Appendix 2: Troubleshooting
1
What can I do if I forget my password?
* Restore the TL-WR802N to its factory default settings (see
below).
* To log in the Web Management page, use the default user
name and password: admin, admin.
* To connect to the Wireless Network, use the default
password on the label.
* Try to configure TL-WR802N once again by following the
instructions in the previous steps of the QIG.
2
How do I restore my TL-WR802N to factory defaultsettings?
With the Router powered on, use a pin to press and hold the
Reset button for about 5 seconds.
LAN/WAN
Power
Note: Upon reset, the device will
clear all previous configurations
and default to router mode.
To Next Page
Loading...
