TP-Link TL-WR802N - Page 35

Français
33
Mode Client / Répéteur
Les exemples donnés ci-dessous sont tirés du mode Répéteur, mais la procédure est
similaire pour le mode Client.
1. Cliquez sur le bouton Survey (Liste) pour afficher les réseaux
sans fil disponibles. Sélectionnez le SSID du réseau cible, puis
cliquez sur Connect (Connexion).
Wireless Name of Root AP : (Also called the SSID)
Ensure you select a correct country to conform local law.
Incorrect settings may cause interference.
Region:
Warning:
Wireless Security Mode:
United States
Most Secure (WPA/WPA2-PSK
Wireless Password:
You can enter ASCII or Hexadecimal characters. For Hexadecimal, the length
should be between 8 and 64 characters; for ASCII, the length should be
between 8 and 63 characters. For good security it should be of ample length
and should not be a commonly known pharse.
Repaeter Mode setting:
NextBack
Working Mode Operation Mode
Wireless Setting Network Setting
Finish
MAC Address of Root AP:
WDS Mode:
Auto
All security settings, for example the wireless password should match the Root AP.
Survey
2. Le SSID correspondant sera automatiquement complété sur
la page des paramètres de connexion sans fil. Sélectionnez le
Mode de sécurité et saisissez le mot de passe. Cliquez sur Next
(Suivant) puis Reboot (Redémarrer).
(Also called the SSID)
Wireless Name of Root AP: (Also called the SSID)
Ensure you select a correct country to conform local law.
Incorrect settings may cause interference.
Region:
Warning:
Wireless Security Mode:
United States
You can enter ASCII or Hexadecimal characters. For Hexadecimal, the length
should be between 8 and 64 characters; for ASCII, the length should be
between 8 and 63 characters. For good security it should be of ample length
and should not be a commonly known pharse.
Repaeter Mode setting:
NextBack
Working Mode Operation Mode
Wireless Setting Network Setting
Finish
MAC Address of Root AP:
WDS Mode:
Auto
All security settings, for example the wireless password should match the Root AP.
Survey
TP-LINK_Network
94-0C-6D-2F-3C-BE
You can click the Survey Button to scan the network SSIDs,
and then choose the target one to setup the connection.