35
Quick Setup - Wireless
SSID:
BSSID:
WEP Index:
Local SSID:
Key Type:
1
None
Start >> Working Mode >> Wireless >> Network Settings >> Finish
Wireless Security Mode:
No Security
If you choose No Security mode, the wireless stations will be able to connect
the AP without encryption. It is recommened strongly that you choose one of
following options to enable security.
Client Setting
NextBack
Auth Type:
open
Password:
Survey
Example: 00-1D-0F-11-22-33
AP Setting
TP-LINK_C5FC
3. Les SSID et BSSID sont automatiquement complétés dans les
champs de paramétrage correspondants. Sélectionnez le Key
type (Type de clé) et saisissez le Password (Mot de passe).
Cliquez sur Next (Suivant) puis Reboot (Redémarrer).
Remarque : Après le redémarrage, reconnectez-vous au réseau en suivant la
procédure « Connexion sans fil instantanée ».
Quick Setup - Wireless
SSID:
TP-LINK_Network
BSSID:
WEP Index:
Local SSID:
Key Type:
1
WPA-PSK/WPA2-PSK
Start >> Working Mode >> Wireless >> Network Settings >> Finish
Wireless Password:
Wireless Security Mode:
Most Secure (WPA/WPA2-PSK)
You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
characters. For good security it should be of ample length and should not be a
commonly known phrase.
Client Setting
NextBack
Auth Type:
open
Password:
Survey
Example: 00-1D-0F-11-22-33
AP Setting
12345670
94-0C-6D-2F-3C-BE
TP-LINK_2046F2
12345670
To Next Page
Loading...
