6
2
If you are connecting the TL-WR802N directly to your cable
modem, you must first power reset the modem and wait
until its ONLINE LED is solid.Then use an ethernet cable to
connect to your modem via the LAN/WAN port on the TL-
WR802N.
If you are connecting the TL-
WR802N to an existing network,
simply plug the cable into the LAN/
WAN port and to your network.
In either case, wait until the LED is
solid green.
3
4
Open Network and Sharing Center
Connections are available
TP-LINK_ XXXX
TP-LINK_Home
TP-LINK_Guest
TP-LINK_Neighbor
Free Public WiFi
Not Connected
Wireless Network Connection
Connect
Connect automatically
Click the Wireless Network
icon on your desktop (
or
). Select the Default
SSID of the TL-WR802N, then
click Connect.
Enter the Default Password,
then click OK or Next.
To Next Page
Loading...
