EasyManua.ls Logo

TP-Link TL-WR902AC - Time Settings

TP-Link TL-WR902AC
269 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR902AC
AC750 Wireless Travel Router
- 235 -
Hotspot Router - It functions as a hotspot router.
AP - This mode stands for Access Point Mode, Repeater Mode and Client Mode. When
selected, you have to go to the Quick Setup to specify the mode you need.
Note: If Control the system mode by software is checked, the operation mode switch of the
router will be disabled.
8.14.2 Time Settings
You can set time manually or get GMT from the Internet for the router on this page:
Time Zone - Select your local time zone from this pull-down list.
Date - Enter your local date in MM/DD/YY into the right blanks.
Time - Enter your local time in HH/MM/SS into the right blanks.
To set time manually, follow the steps below:
1. Select your local time zone.
2. Enter the Date in Month/Day/Year format.
3. Enter the Time in Hour/Minute/Second format.
4. Click Save.
For automatic time synchronization:
1. Enter the address of the NTP Server 1 or NTP Server 2.
2. Click the Get GMT button to get GMT time from Internet if you have connected to Internet.

Table of Contents

Other manuals for TP-Link TL-WR902AC

Related product manuals