EasyManua.ls Logo

TP-Link TL-WR902AC - Network; Wan

TP-Link TL-WR902AC
269 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR902AC
AC750 Wireless Travel Router
- 32 -
Sent (Packets) - Traffic that counted in packets has been sent out from the WAN port.
System Up Time - The length of the time since the Router was last powered on or reset.
Click the Refresh button to get the latest status and settings of the Router.
4.3 Network
There are three submenus under the Network menu: 3G/4G, WAN, MAC Clone and LAN. Click
any of them, and you will be able to configure the corresponding function.
4.3.1 WAN
Choose menu Network
WAN, and then you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follow:

Table of Contents

Other manuals for TP-Link TL-WR902AC

Related product manuals