AC750 Wireless Travel Router
- 78 -
4.9.3 Target
Choose menu “Access Control
Target”, you can view and set a Target list in the screen as
shown below. The target list is necessary for the Access Restriction Rule.
Target Description - Here displays the description about the target and this description is
unique.
Information - The target can be IP address, port, or domain name.
Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New… button.
2. In Mode field, select IP Address or Domain Name.
If you select IP Address:
1) In Target Description field, create a unique description for the target (e.g.
Target_1).
2) In IP Address field, enter the IP address of the target.
3) Select a common service from Common Service Port drop-down list, so that the
Target Port will be automatically filled. If the Common Service Port drop-down list
doesn’t have the service you want, specify the Target Port manually.
4) In Protocol field, select TCP, UDP, ICMP or ALL.
If you select Domain Name:
1) In Target Description field, create a unique description for the target (e.g.
Target_1).
To Next Page
Loading...
