TPI PM-18FO User Manual

Issue Date: 3-11-05 Rev. Date: 9-12-07 Rev. Level: 13 ECN: n/a OIPM P/N: 3420433 Page 1 of 8
1200 North Main St.
Fostoria, OH 44830
Phone: 800-495-4525
Fax: 419-435-0842
www.tpicorp.com
SELF-CONTAINED POWER MISTER
MODELS: PM-18FO, PM-18S, PM-18C
IMPORTANT SAFETY
INFORMATION INSIDE
• Serious injury or death possible.
• Read, understand, and follow all
safety information and
instructions in this manual before
using or servicing this product.
• Retain these instructions for
future reference.
CONTENTS
Specifications Pages 2,3
PM-18C Assembly Pages 3,4
Set-up / Operation Pages 5,6
Replacement parts
Maintenance
Page 7
Page 8
Warranty Page 8
PM-18FO
PM-18S
PM-18C
If you have questions about the
product you have purchased or would
like to leave us feedback please
contact us via our website
www.fostoriaindustries.com
or by calling 1-800-495-4525.

TPI PM-18FO Specifications

General

Brand	TPI
Model	PM-18FO
Category	Air Conditioner
Language	English

Summary

Product Overview and Safety

Important Safety Information

Essential safety warnings and instructions to prevent serious injury or death before using or servicing the product.

Product Specifications and Models

Model Descriptions

Details the three available models: PM-18FO, PM-18S, and PM-18C, outlining their unique features and configurations.

Technical Specifications

Provides comprehensive electrical and performance data for all models, including voltage, frequency, amperage, pump output, and fan specs.

PM-18FO Specifics

Highlights features specific to the PM-18FO, such as its fan guard, GFCI, tip switch, and cooler compatibility.

PM-18S and PM-18C Details, Assembly

PM-18S and PM-18C Model Features

Outlines the specific features of the PM-18S and PM-18C models, including cooler integration and cart components for the PM-18C.

PM-18C Cart Assembly and Parts

Presents the parts list and identification for the PM-18C cart assembly, detailing components required for building the unit.

PM-18C Assembly Instructions

Step-by-Step Cart Assembly

Provides detailed, numbered instructions for assembling the PM-18C cart, including tools required and component placement.

Setup, Operation, and Safety

General Setup and Operation

Guides users through initial setup, filling, and operating the power mister, including fan-only and misting modes.

GFCI Safety Plug Test

Details the procedure for testing the Ground Fault Circuit Interrupter (GFCI) plug before each use to ensure electrical safety.

Operational Warnings and Cautions

Highlights critical warnings for electrical shock, pinch hazards, trip hazards, and cautions for proper use and maintenance.

Model-Specific Operation and Hazards

Operating Models PM-18S and PM-18FO

Instructions for preparing and operating the PM-18S and PM-18FO units, including cooler setup and water reservoir requirements.

Operating Model PM-18C

Instructions for preparing and operating the PM-18C unit, including moving the cart and cooler and pump enclosure placement.

Tip Hazard Warning

Alerts users to the risk of tip hazards when moving the mister cart, emphasizing support and avoiding filling before moving.

Replacement Parts List

PM-18FO & PM-18S Parts Identification

Lists and identifies all part numbers, descriptions, and quantities for the PM-18FO and PM-18S models.

Maintenance and Warranty

Maintenance Procedures

Provides guidance on maintaining the filter, nozzles, and system for storage, including cleaning and draining procedures.

Product Warranty Information

Details TPI Corporation's warranty policy, including procedures for returns, product failure reporting, and seller's liability.