T+A PA 3000 HV User Manual

40
Remote control
Introduction
In general terms the function of the buttons on the remote control handset is the
same as the corresponding buttons on the machine’s front panel.
The following table shows the remote control buttons and their function when
operating the machine.

Switches the device on and off

The loudspeaker groups A und B are switched on and off by
pressing this button repeatedly. A long press switches the
loudspeaker outputs off.

Direct source select buttons

…

The listening sources can be selected directly using the SOURCE
buttons  to . The  button has a dual
function. Press the button twice to select listening source 6.


Increase / decrease volume
The volume can be increased / decreased in steps by tipping
one of the volume buttons. The current volume level is displayed
on the display screen. If one of the buttons is kept pressed for
approx.. 2 seconds the volume increases / decreases
continuously until the button is released.

 Starts playback (Play function)
During playback: halts (Pause) or resumes playback.
(Only for connected  source devices.)

Halts playback
(Only for connected  source devices.)
Navigation

Returns to the previous point / change button

Confirms the input / change button

Selects the previous point within a list / select button

Selects the next point within a list / select button

Confirmation button during input procedures

Alpha-numeric input


abc
...

wxyz

Special characters are assigned to the  and 
buttons.
During the text input process it is possible to switch between
numerical and alpha-numeric input, and between capital and
lower-case letters, using the  button.

Opens the source menu of a connected  device.

Brief press: Opens the tone control settings menu
Long press: Opens the configuration menu
(for detail see chapter entitled 'Basic settings of the
PA 3000 HV')

Opens the configuration menu of a connected  device.

Function button for connected  source devices.

Function button for connected  source devices.

During character input:
Switches between numeric and alpha-numeric input, and
between capitals and lower case when pressed (repeatedly)
Function button for connected  source devices.

T+A PA 3000 HV Specifications

General

Brand	T+A
Model	PA 3000 HV
Category	Amplifier
Language	English