Track Systems GT60 - Command List

- 11 -
8 Command List
Remarks: ****** is user’s password and the default password is 000000.
Description Command Remarks
Get current location
W******,000 Get current location of GT60
Change user’s password
W******,001,###### ****** is old password
###### is new password
Set interval for automatic
timed report
W******,002,XXX XXX is the interval in minute. If
XXX=000 it will stop tracking
Set preset phone number
for SOS button
W******,003,F,P,T F=0, to turn off this function;
F=1, only sending SMS;
F=2, only calling preset phone number;
F=3, both SMS and calling (default)
P=1, set a authorized number for SOS
button
P=2, set a authorized number for B
P=3, set a authorized number for C
T: Preset phone number. Max. 16 digits
Set low power alert
When GT60 voltage is lower
than the preset value, it will
send one low power alert to
the SOS preset number.
W******,004,X X (voltage preset value)
=0 , to turn off this function
=1, <3.3V send SMS alert
=2 , <3.4V send SMS alert
=3 , <3.5V send SMS alert (default )
=4 , <3.6V send SMS alert
=5 , <3.7V send SMS alert
Set over speed alert
When GT60 speeds higher
than the preset value, it will
send one over speed alert to
the SOS preset number.
W******,005,XX XX (the preset value of speed)
=00 , to turn off this function
=[01, 20] (unit: 10Km/h)
For example, W000000,005,08, it will
sent alert when it is over 80Km/h
Set Geo-fence alert
When GT60 moves out of
preset scope, it will send one
Geo-fence SMS to the SOS
preset number.
W******,006,XX XX ( preset distance to original place )
=00, to turn off this function
=01, 30m
=02, 50m
=03, 100m
=04, 200m
=05, 300m
=06, 500m
=07, 1000m
=08, 2000m
Track Systems Ltd