How to turn on Track Systems GT60 GPS?
If your Track Systems GPS unit isn't turning on, first ensure you press and hold the power button for 3-5 seconds. If that doesn't work, the battery likely needs charging. Recharge it for approximately 3 hours.
Why is the green LED flashing on my Track Systems GT60 GPS?
If the green LED is flashing (on for 1 second and off for 2 seconds) on your Track Systems GPS, it indicates a problem with GSM signal. Here's what you can do: * Check if there is a GSM signal in the area using a mobile phone or try calling the unit to see if you hear a ring tone. * Ensure a working SIM card is inserted and can send SMS messages. * Verify that the SIM card hasn't expired.
What to do if blue LED is flashing on Track Systems GPS?
If the blue LED is flashing (on for 1 second and off for 2 seconds) or the SMS received starts with ‘Last…’ on your Track Systems GPS, it means the unit isn't getting a clear view of the sky. Move the unit to a location where the sky is visible. Tall buildings, trees, and heavy rain can interfere with GPS reception. Additionally, ensure that the front side of the GT60 is placed towards the sky. Also, recharge the unit, because the battery may be low.
General| Weight | 50g |
|---|---|
| GSM Frequency | 850/900/1800/1900MHz |
| GPRS | Class 12 |
| TTFF (Open Sky) Hot Start | 1 sec |
| Operating Temperature | -20℃～ +70℃ |
| Humidity | 5% to 95% non-condensing |
| Positioning | GPS |
| Time to First Fix Hot Start | 1 sec |
| Operating Temperature Range | -20℃～ +70℃ |
| Antenna Type | Internal |
Lists all the components included with the GT60 device for setup and operation.
Explains the meaning of LED indicators and the function of each button on the GT60.
Provides essential steps and checks before the first use of the GT60, including SIM and charging.
Covers essential SMS commands for location reporting, timed reports, and SOS/call functions.
Explains how to configure GPRS settings using SMS commands for data tracking.
To Next Page