14
SAFETY
Driving a Damaged Vehicle
Driving a damaged vehicle is not safe.
If the vehicle has been involved in any type of accident, have it inspected by a qualified service dealer to verify that it
is safe for operation.
Driving at Maximum Speeds
Maximum speed operation increases the risk of loss of control. Always drive at a speed that is appropriate for the ter-
rain, visibility, operating conditions, and your skill and experience level. Use the brake to control speed and maintain
control of the vehicle.
Driving on Pavement
Driving the vehicle on paved surfaces can affect handling characteristics and increase tire wear.
If possible, avoid driving on paved surfaces. If unavoidable, drive slowly, travel short distances, and avoid sudden
turns or stops.
Driving on Public Roads
Driving this vehicle on public streets, roads or highways could result in a collision with another vehicle. Never drive this
vehicle on any public street, road, or highway, including dirt and gravel roads, unless they are designated for off road
use. Most areas prohibit the operation of this vehicle on public streets, roads, or highways and can result in traffic vio-
lations and fines.
Spark Arrestor and Use on Public Lands
Federal law requires that the spark arrestor be installed and functional when the vehicle is operated on public lands.
Spark arrestor accessory kit 680463 is available by contacting an authorized dealer or customer care.
Off road operation on public lands in the USA is regulated by 43 CFR 420. Violations are subject to monetary penal-
ties. Go to www.gpo.gov/fdsys to see federal regulations.
Turning
Improper or careless turning can cause loss of traction, loss of control, accident, or rollover. Do not turn quickly or at
sharp angles. Do not turn at high speeds. Practice turning at slow speeds before attempting to turn at faster speeds.
Driving Uphill
Do not climb hills that are too steep for the vehicle or your driving abilities. Loss of vehicle control or rollover can result
from climbing hills incorrectly. Refer to Driving Uphill on page 25 for operational information.
DrivingDownhill
Inspect the terrain before descending a hill. Avoid driving across hills. Use the brake to limit speed and maintain con-
trol. Loss of vehicle control or rollover can result from driving downhill incorrectly. Refer to Driving Downhill on page 25
for operational information.
Stalling on a Hill
A rollover can result from stalling or rolling backward while climbing a hill. Drive uphill at a constant speed. See proce-
dure on page 25 for maintaining control of your vehicle if it stalls on a hill.
Tires
Operating the vehicle with the incorrect tires or with the incorrect or uneven tire pressure can cause loss of control or
an accident. Always use the size and type of tires specified for the vehicle. See Vehicle Specification for proper tire
type and size. Always maintain the correct tire pressures as specified in Tire Pressure on page 11.
SlipperyTerrain
Driving on rough, wet, or loose terrain increases the risk of loss of traction or control and accident or rollover. Drive
slowly and use the correct turning procedures when operating on slippery surfaces.
Tires that have lost traction and then regain traction suddenly can cause loss of vehicle control or rollover.
Refer to Slippery Surfaces on page 24 for operational information.
HOT EXHAUST SYSTEMS
Exhaust system components are very hot during and after use. To avoid burn injuries, do not touch hot exhaust sys-
tem components. Hot components can also cause a fire. Keep combustible materials away from the exhaust system.
Check for buildup around the exhaust system after driving through high and dry grass.
To Next Page
Loading...
