FEATURES AND CONTROLS
19
EFIMALFUNCTION INDICATOR LIGHT (MIL)
The MIL is located on the rear of the seat frame. Lift the truck
bed to view the MILThe MIL can be used to diagnose a prob-
lem and whether a technician will be required to service the
vehicle. See MALFUNCTION INDICATOR LIGHT (MIL) on
page 49.
SEATBOTTOM
The bench seat is designed for two occupants.
Lift up on either hip restraint to pivot the seat bottom forward and access the components underneath. Pivot and lift up
on the seat to completely remove it from the vehicle.
GLOVE BOX/STORAGE COMPARTMENTS
The glove box provides storage space for small items. Glove boxes may be equipped with optional shelf and/or glove
box doors.
FUEL TANK CAP
Always make sure the fuel cap is reinstalled after
filling the tank. Do not operate the vehiclewith-
outthe fuel cap correctly installed and tightened.
The fuel cap is located on the passenger side of the vehicle.
See Fuel on page 22 for fueling information.
CANOPYTOP AND WINDSHIELD
The canopy top does not provide protection from rollover or falling objects.
The windshielddoes not provide protection from tree branchesormoving objects.
Toprevent damage to the vehicle, do not hold on to the canopy top struts.
The canopy top and windshield provide some protection from the elements, but do not keep the operator and passen-
ger dry in heavy rain.
This vehicle is not equipped with seat belts, and the canopy top is not designed to provide rollover protection. In addi-
tion, the canopy top does not protect against falling objects, nor does the windshield protect against flying objects and
tree limbs.
Rear of
Front Seat
MIL
Fuel Cap
To Next Page
Loading...
