To Next PageTo Next Page
Need help?Do you have a question about the Tractel Minifor TR 50 and is the answer not in the manual?
General| Model | TR 50 |
|---|---|
| Lifting Capacity | 500 kg |
| Lifting Speed | 5 m/min |
| Power Supply | 230 V / 50 Hz |
| Weight | 20 kg |
| WLL (Working Load Limit) | 500 kg |
| Capacity | 500 kg |
| Chain Type | Wire Rope |
| Control | Pendant |
Explains the self-clamping drive system and wire rope clamping mechanism of the Minifor hoist.
Details the physical description, serial numbers, labels, and control box features of the Minifor hoist.
Describes the most common installation method, securing the hoist by its hook.
Explains how to properly secure a load to the hoist hook using slings.
Lists essential checks before setting up the hoist to ensure safety and proper operation.
Provides guidance on power supply, extension cables, and electrical safety for the hoist.
Explains the phase direction detector feature for three-phase motor models.
Details the installation procedure for the tackle kit, including wire rope length and limit stops.
Explains how to operate the hoist when using the tackle system, emphasizing load stability.
