To Next PageTo Next Page
Need help?Do you have a question about the Tractel bravo and is the answer not in the manual?
General| Type | Manual Chain Hoist |
|---|---|
| Safety Factor | 4:1 |
| Standard Lift | 3 m |
| Lift Height | 3 meters (standard), customizable |
| Chain Size | 10 mm |
| Number of Falls | 1 or 2 |
| Weight | Varies by model (e.g., 12kg to 45kg) |
Covers essential safety measures, user responsibilities, pre-use checks, and regulatory compliance for safe operation.
Verify hoist condition, capacity, hooks, limit stop, chain, and anchor point before installation.
Confirm correct suspension, chain alignment, and functional checks after installation.
Hoist operated by moving an actuating handle back and forth to lift, pull, or tension.
Steps for attaching the lifting hook to the load or rigging point, adjusting chain length.
Instructions for lifting, pulling, tensioning, and lowering/slackening the load.
Key advice for safe operation, including load limits and lever handling.
Details on the hoist nameplate, including designation, WLL, chain dimensions, CE marking, and manufacturer.
Information about labels for hoists equipped with the load limiter option.
Lists actions, conditions, and environments to avoid for safe and correct operation of the hoist.
