Need help?Do you have a question about the Trademaster TM26005 and is the answer not in the manual?
Ensure a clear, clean, and well-lit workspace, keeping others away. Avoid hazardous environments.
Use polarized plugs, avoid grounded surfaces, and protect cords from damage and water.
Dress appropriately, stay alert, use common sense, and wear safety equipment like eye protection.
Secure workpieces, use the correct tool, ensure switches function, and maintain the tool.
Tool service, mechanical and/or electrical must be performed by qualified personnel using identical replacement parts.
Ensure blade is sharp, replace damaged blades, use correct flanges, and keep workspace clear.
Use heavy gauge cords appropriate for the product's amperage and cord length to prevent voltage drop.
Do not stare at the laser beam. Aim only at workpieces. Use on sturdy, non-reflective surfaces.
Mark cut line, align beam, start motor, let blade reach speed, push saw forward, release trigger.
Details motor speed, power supply, and cutting dimensions for various angles.
Lists items like blade, clamp, support brackets, dust bag, and carbon brushes.
Step-by-step guide to removing and installing the saw blade using specific tools and safety measures.
The blade guard lifts with the workpiece and automatically resets. Never remove or abandon the guard.
Use the protective switch and trigger switch to start and stop the tool safely.
Connect and use the sawdust collector for convenient dust management during operation.
Check and replace carbon brushes when worn to the limit mark, ensuring they slip freely.
Procedure for cutting small workpieces by pushing the carriage and lowering the handle.
Procedure for cutting wide workpieces by releasing the knob and moving the carriage.
Loosen the hand shank, press the spring pin, align the scale, and tighten to set the angle.
Install and adjust the vertical vise, lean the workpiece, and tighten the clamp bolt.
Adjust the machine using the bolt to ensure the blade does not contact the table after grinding.
Detailed list of all parts with item numbers, descriptions, and quantities.
Covers defects in material/workmanship for three years. Excludes misuse, normal wear, and accessories.
Loosen the screw to release the guard fixed plate and push the guard assembly forward.
Note that the blade bolt is left-hand thread, requiring turning right to loosen.
General| Brand | Trademaster |
|---|---|
| Model | TM26005 |
| Category | Saw |
| Language | English |
To Next Page
