19
TRAEGER.COM
HOPPER CLEAN-OUT
Your Traeger® Fremont Grill has a hopper clean-out system that allows you to remove pellets from the pellet hopper or quickly change from one
pellet flavor to another without making a mess.
1
3
2
4
PLUG APPEARANCE MAY VARY BY REGION.
Turn the main power switch to OFF (O) and disconnect the power
cord. If the grill is still hot, allow it to cool completely.
Unscrew the clean-out door fastener and open it. Pellets will empty
into the container you've placed below. You might need a spatula
or spoon to push the remaining pellets out of the hopper.
Once the hopper is empty, close the clean-out door, replace the
fastener, and refill the hopper with your preferred flavor of TRAEGER®
BRAND HARDWOOD PELLETS.
Place a container large enough to hold the unused pellets under the
pellet clean-out door.
TIP: A clean 5-gallon (19-liter) bucket works great!
WARNING! DO NOT EMPTY OUT THE HOPPER UNTIL
GRILL HAS COMPLETELY COOLED AND THE POWER IS
OFF; OTHERWISE, PELLETS MAY BE VERY HOT.
To Next Page