Trailer Vision Digi-Max2 - Setting SCAN Mode; Setting QUAD Display

13
2. Press (MENU button) to restore the default settings as below.
Setting SCAN Mode
Press the SCAN button to enter the SCAN mode and display camera
channels automatically.
1. Press
(MENU button) and use (Left / Right) to turn all available
channels ON.
2. Use
(SCAN button) to enter SCAN Mode.
3. The camera images will be displayed
periodly in scan mode. Unavailable
channels will be displayed as a blank screen.
(Left / Right / Up / Down) to go To exit SCAN display, please press
to the specified channel.
Setting QUAD Display
Press the QUAD button to enter the QUAD mode and display all the camera
images on the monitor.
1. Press
(MENU button) and use (Left / Right) to turn all available
channels ON.
2. Use
(QUAD button) to enter QUAD Mode.
3. All camera images will be display on the monitor at the same time. Unavailable
channels will be displayed as
a blank screen.
(Left / Right / Up / Down) to go
To leave QUAD display, please
press to the
specified channel.
Scan 3S
CAM1 ON
CAM2 ON
CAM3 ON
CAM4 ON
Pair CAM 1 2 3 4
Brightness Monitor 08
CAM1 08
CAM2 08
CAM3 08
CAM4 08