Concrete Encounter CME 4
User Guide
24/08/04
Table of Contents
Introduction ..............................................................2
How it works............................................................. 3
Instrument Features................................................. 4
Operating Instructions............................................. 5
Working with your Concrete Encounter CME 4..... 7
Drying time for concrete floors and screeds...... 7
Testing for moisture content in a floor slab ....... 7
Pre-test conditioning and preparation...................7
Testing procedures...................................................8
Calibration................................................................. 9
Limitations ................................................................ 9
Warranty.................................................................. 10
Warranty claims...................................................... 10
Product development............................................. 11
Introduction
Congratulations on your selection of a new Concrete
Encounter CME 4 instrument from Tramex.
The Concrete Encounter utilises “state of the art” electronic
technology to provide the flooring industry with an accurate
and simple to use non-invasive handheld instrument for non-
destructive testing (NDT) of Moisture Content (MC) in
concrete
and comparative moisture readings in, gypsum and
other floor screeds.
2
CME4/1005
To Next Page
Loading...
