Trane Technologies 4TWL5030N1000A - User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
June 2022
1188--BBCC111100DD11--11AA--EENN
Side Discharge HP Models
For coastal applications where units are installed within one (1) mile of salt water, epoxy coated models are recommended. These models
have an 8 week lead time after order.
EEppooxxyy CCooaatteedd MMooddeell
4TWL5024N1000A
4TWL5030N1000A
4TWL5036N1000A
4TWL5042N1000A
4TWL5048N1000A
4TWL5024N1COTA
4TWL5030N1COTA
4TWL5036N1COTA
4TWL5042N1COTA
4TWL5048N1COTA
NNoottee:: “Graphics in this document are for representation
only. Actual model may differ in appearance.”
Installer’s Guide

Summary

Safety Section

Hazardous Voltage Warning

Warning about severe personal injury or death from hazardous voltage.

Refrigerant Oil Warning

Warning regarding property damage, injury, or death from refrigerant oil handling.

Contains Refrigerant Warning

Grounding Required Caution

Service Valves Warning

System Start Up

Subcooling Charging in Cooling

System Charge Adjustment

Charging the Unit

Checkout Procedures

Troubleshooting

Trane Technologies 4TWL5030N1000A Specifications

General

Cooling Capacity	2.5 Tons
SEER	16
HSPF	9.0
Sound Level	72 dB
SEER Rating	16
Refrigerant Type	R-410A
Voltage	208/230 V
Phase	1
Unit Weight	220 lbs