Page 12
Lifting procedures provided with the unit have to be respected.
CAUTION
Do not use forklift trucks to lift the unit from below.
If equipment for lifting from above is not available, using rollers may move the unit.
The surface on which the unit is placed must be flat and strong enough to withstand the weight of the unit while
running. In order to reduce the transmission of vibrations to the supporting structures, fit shock absorbers in
every fastening point. Rubber shock absorbers are recommended for units installed on the ground, spring shock
absorbers for units installed on roofs. Open spaces around the unit must be provided for in order to allow normal
maintenance to be carried out (as shown on general catalogues).
IMPORTANT: Make sure that during transport the CCUF unit ALWAYS remains in the correct position!
For example horizontal positioning of the unit can lead to irreversible damage to the compressors.
Damage arising from incorrect transport will not be under warranty by the manufacturer.
Immediately report an incorrect receipt of goods.
An arrow positioned upward indicates the vertical position of the unit.
To Next Page
Loading...
Need help?
General
