Need help?Do you have a question about the Trane CGAD050C and is the answer not in the manual?
General| Model | CGAD050C |
|---|---|
| Type | Air-Cooled Chiller |
| Refrigerant | R-410A |
| Compressor Type | Scroll |
| Voltage | 208-230/460/575V |
| Phase | 3 |
| Cooling Capacity | 50 tons (Nominal) |
| Full Load Amps | Varies with voltage; see specific model data |
Introduces Trane CGAD liquid chillers and their features for performance and durability.
Explains the meaning of each digit in the Trane CGAD model number for configuration.
Presents a comprehensive table of general technical data for various models.
Details formulas and steps for determining chilled water flow and evaporator pressure drop.
Provides key considerations and an example for selecting the appropriate chiller unit.
Guidance on unit sizing, optimal placement for airflow, and sound transmission reduction.
Covers hydraulic piping, instrumentation, drains, and water treatment requirements.
Graphs illustrating evaporator pressure drop based on flow rate and unit capacity.
Factors for adjusting performance based on glycol concentration and altitude variations.
Detailed performance data for R-22 units at various condenser air temperatures.
Detailed performance data for R-407C units at various condenser air temperatures.
Lists electrical data for 60 Hz models, including consumption and currents.
Lists electrical data for 50 Hz models, including consumption and currents.
Describes the CH530 controller, its display, and safety monitoring functions.
Overview of remote operation, optional features, and ICS integration.
Details protections like internal thermostats, phase monitoring, overload, and pressure limits.
Covers start balancing, water flow control, cold area operation, and service recovery.
Explains how Tracer Summit integrates chiller control for building automation.
Discusses interfacing with external systems and communication protocols.
Details ice making mode, energy efficiency strategies, and optimization.
Covers rapid response for emergencies and diagnostic information for operators.
Provides detailed drawings and dimensions for the CGAD 020C unit.
Provides detailed drawings and dimensions for the CGAD 025C/030C units.
Provides detailed drawings and dimensions for the CGAD 040C unit.
Provides detailed drawings and dimensions for the CGAD 050C/060C units.
Provides detailed drawings and dimensions for the CGAD 070C unit.
Provides detailed drawings and dimensions for the CGAD 080C/090C units.
Provides detailed drawings and dimensions for the CGAD 100C unit.
Provides detailed drawings and dimensions for the CGAD 120C unit.
Provides detailed drawings and dimensions for the CGAD 150C unit.
Diagrams showing required clearances for proper airflow and maintenance access.
Details construction of evaporators/condensers and sizes of refrigerating lines.
Describes cooling circuit components and the technology of scroll compressors.
Summarizes key dimensional data, including weight and floor area, in a table.
To Next Page