Need help?Do you have a question about the Trane Sintesis Advantage CGAF 140 SE and is the answer not in the manual?
General| Model | CGAF 140 SE |
|---|---|
| Category | Chiller |
| Cooling Capacity | 140 tons |
| Refrigerant | R-134a |
| Compressor Type | Screw |
| Sound Level | 75 dBA |
| Voltage | 460V/3Ph/60Hz |
Guidelines to avoid death, injury, and equipment damage during service.
Defines the unit type (Chiller or Heat Pump) based on the first four digits.
Specifies the unit's cooling/heating capacity in tons.
Verifies unit correctness and condition upon delivery.
Pre-start checks for Trane technician before unit startup.
Options and measures to protect the evaporator from freezing.
Critical safety warning regarding high voltage and pressurized fluid.
Explains the three operating modes for chiller integrated free-cooling.
Conditions required for the free-cooling function to become active.
Information about the operator interface for daily tasks and diagnostics.
Checklist to verify installation is complete before unit startup.
Procedure for verifying correct electrical phase sequence for compressor rotation.
Essential information for proper unit operation and performance.
To Next Page