Need help?Do you have a question about the Trane SINTESIS ADVANTAGE CXAF Series and is the answer not in the manual?
General| Compressor Type | Screw |
|---|---|
| Refrigerant | R-134a |
| Voltage Options | 380-480V, 3-phase, 50/60 Hz |
| Water Flow Rate | Varies with model; consult product data |
| Dimensions (LxWxH) | Varies with model |
| Weight | Varies with model |
Explains the meaning of WARNING and CAUTION symbols and text.
Provides safety guidelines for maintenance and service visits.
Defines free-cooling options and fan type codes.
Checklist to verify unit installation and equipment readiness before startup.
Checklist for Trane technicians prior to unit startup.
Lists responsibilities for Trane-supplied and field-supplied components.
Lists general responsibilities for installing a CGAF/CXAF unit.
Provides instructions and warnings for safely lifting and moving the unit.
Details on water pump heaters, heat tape, and glycol for freeze protection.
Adjusting setpoints for low temp and antifreeze protection.
Procedures for checking supply voltage, imbalance, and phase sequence.
Requirements for power supply wiring, control power, and heater supply.
Explanation of the three operating modes for integrated free-cooling.
Conditions required for the free-cooling function to be active.
Checklists for verifying installation and general pre-start procedures.
Procedures for checking supply voltage, imbalance, and phase sequence.
Step-by-step procedure for daily unit startup.
Procedures for seasonal startup and restarting after extended shutdown.
Symptoms indicating refrigerant under- or over-charged conditions.
Symptoms indicating oil over- or under-charged conditions.
Importance of correct wiring for rotation and procedure for checking oil level.
To Next Page